preloader

North America  +1 833 MEM TOOL (636 8665)  

  Worldwide  +39 0761 5051

order@marmoelettro.it    

    info@marmoelettro.it

en_US
en_US it_IT

3000/6000 RPM

Water System

Rollers

3,5 HP

48V - 50/60 Hz

The Three-phase Safety electrical conversion unit with 220V, 380V, and 415V options, constructed according to the international safety regulations. With 3000W power and a 48V output and double insulation.

3000W / 220V

For North America

3000W / 415V

For the UK

3000W / 380V

For Europe and rest of the world
01

CEI EN 50347

Reference Standard
02

CEI EN 60034-1 : 2015

Dimensional Standard
05

ISO 10816-1 : 1995

Mechanical Vibrations
Master 3500 is a portable electric contouring machine with “Water System” base board which creates a gliding water film between the machine and the slab. This system immediately eliminates the stone pieces broken during the working without scratching the surfaces. The Master 3500 machine is built with high-quality material, only coming from the best suppliers. This product is produced with the highest standards and is certified by international and European standardization organizations.
“It’s a good one. Pay attention to the voltage needed for the transformer!”
Chris Hildebrand
Fabricator
“Excellent machine. We had two at the start. These helped us. Don’t be afraid of them. They are worth the money.“
Al Douma
Fabricator
“First I ever used… great“
Mark Lauzon
Fabricator
“They are great. A must have , especially for a small shop“
Dustin Wallace
Fabricator
“They are great“
Mike Ezell
Fabricator
“Extremely well built. Last forever“
Cliff Lane
Fabricator
“very reliable“
Nathan Parsons
Fabricator
“The best router!!“
Marlon Lutin
Fabricator
“What are you looking to know? We have 3 of them from 2003!“
Chad Cusimano
Fabricator
“Very good highly recommend “
Graham Henry
Fabricator
“Marmo Master still got ours hardly use it anymore except when CNCs are stacked out and we need to run a profiled edge. But we got our moneys worth our of it“
Mubeen Patel
Fabricator
“We have two of them. One is about 7 years old. They are great. The hydroplane base works well“
Blake Williams
Fabricator

Breaker Bits

Position #0

Suitable for Granite, Ceramic, Quartz & Marble

Stock Removal
Life

Pre-Cutting Bits

Position #0

Suitable for Granite, Ceramic, Quartz & Marble

Stock Removal
Life

Grinding Bits

Positions #1 #2 #3

Suitable for Granite, Ceramic, Quartz & Marble

Stock Removal
Life

Grinding Bits

Positions #1 #2 #3

Suitable Only for Marble

Stock Removal
Life

Grinding Bits

Positions #1 #2 #3

Suitable for Granite, Ceramic, Quartz & Marble

Stock Removal
Life

Polishing Bits

Positions #4 #5 #6

Suitable for Granite, Ceramic, Quartz & Marble

Stock Removal
Life
Gloss